TIMKEN 313WDDN Single Row Ball Bearings

Sealed Speed Rating n3:5600 rpm; Fillet Radius ra:1.50 mm; D:80.0000 mm; Grease Speed Rating n1:5600 rpm; Basic Dynamic Radial Load Rating C:52300 N; d:35.000 mm; Basic Static Radial Load Rating Co:48000 N; Accessories:No Shield, no Seal; B:38.10 mm; Oil Speed Rating n2:7500 rpm;

H1:47.6 mm; J:126 mm; A5:22 mm; Basic dynamic load rating C:25.5 kN; Basic static load rating C0:15.3 kN; Recommended tightening torque for grub screw:6.5 N·m; Housing:SY 507 M/VZ033; Bearing:YARAG 207-107; A1:27 mm; J max.:133 mm;

C:104.775 mm; α:5 °; B:120.65 mm; Da max.:213.5 mm; d:152.4 mm; Lubricant:Maintenance free &nd; Basic dynamic load rating C:2600 kN; da min.:161 mm; rb max.:1.1 mm; Material constant KM:330;

Appropriate attachment bolt, size G:48 mm; P150°:3500 kN; Locating ring:2 x FRB 31.5/780; Eye bolt, size:2 x M 48; Q180°:2900 kN; bb:182.5 mm; P180°:4400 kN; A1:440 mm; Q150°:3350 kN; ba max.:243 mm;

Basic Static Radial Load Rating Co:29000 N; Fillet Radius ra:1.50 mm; Grease Speed Rating Open/Shielded n1:6300 rpm; Accessories:Synthetic Rubber Sea; Oil Speed Rating Open/Shielded n2:7500 rpm; d:55.000 mm; B:33.34 mm; Basic Dynamic Radial Load Rating C:39700 N; Sealed Speed Rating n3:4300 rpm; D:1

l4 max.:81 mm; l3 min.:17 mm; Specific dynamic load factor K:100 N/mm²; d4 max.:26 mm; d:25 mm; Basic dynamic load rating C:48 kN; G:M 16x1.5; α:7 °; h1:50 mm; Basic static load rating C0:52 kN;

Basic dynamic load rating C:0.761 kN; Da max.:12.4 mm; r1,2 min.:0.2 mm; d:5 mm; d2 ≈:6.9 mm; da min.:6.6 mm; D2 ≈:12.2 mm; Calculation factor f0:6.6; Reference speed:110000 r/min; Mass bearing:0.0035 kg;

Basic dynamic load rating C:4400 kN; D1:956 mm; da min.:1089 mm; d:950 mm; H:135 mm; D:1120 mm; B:40.5 mm; Da max.:981 mm; Fatigue load limit Pu:1630 kN; ra max.:4 mm;

R2:33.337 mm; R1:104.775 mm; Cap bolt, SAE grade:5; Cap bolt recommended tightening torque:203.4 N·m; P90°:136 kN; Initial grease fill:793.8 g; P180°:94.3 kN; J min.:441.325 mm; A1:158.75 mm; ba:68.263 mm;

Appropriate attachment bolt size G:0.75 in; Ca:55.804 mm; Initial grease fill:181.44 g; Cap bolt, SAE grade:8; P90°:105 kN; Bearing:22220 EK; Housing:FSAFS 520; Labyrinth ring:2 x LOR 103; Stabilizing ring:SR-20-17; N1:22.225 mm;

B1:122 mm; Hydraulic nut:HMV 34 E; d:170 mm; d3:220 mm; G:M 170x3; B:33 mm; d1:152.4 mm; Mass adapter sleeve assembly:7.65 kg; Lock nut:KMFE 34;

Lock washer / Locking clip:MS 3192-88; B5:90 mm; Associated spanner:TMFN 80-500; B3:15 mm; d2:478 mm; h:20 mm; d1:508 mm; d3:560 mm; G:Tr 440x5; Mass lock nut:42.5 kg;

P90°:60.9 kN; Mass pillow block:22.4 kg; P180°:42.3 kN; L:349.25 mm; h:38.1 mm; RG:3/8 NPT; A2:149.225 mm; Adapter sleeve assembly:SNW 18x3.1/4; R2:27.781 mm; Da:160 mm;

r1s (min):2 mm; B:36 mm; r2s (min):0.6 mm; D:150 mm; Static (Coa):290.2 kN; T:38.5 mm; C:30 mm; d2:85 mm; rs (min):2.5 mm; Pu:33.510 kN;

D:130.0000 mm; d:75.000 mm; Fillet Radius ra:1.50 mm; Accessories:Without Accessories; Basic Static Radial Load Rating Co:72000 N; Oil Speed Rating Open/Shielded n2:4800 rpm; Grease Speed Rating Open/Shielded n1:3900 rpm; Basic Dynamic Radial Load Rating C:74800 N; B:25.00 mm;